Regency Fireplace Products Onyx EX110 Instructions For Use & Installation page 10

APP SET UP
Downloading the Regency Electric App
Easily control your Regency Electric Fireplace's full range of features
from your smart phone or tablet using the Regency Electric app.
This easy-to-use app will unlock the full potential of these incredible
electric fireplaces and is available on the Apple App Store or Google
Play Store. Locate the Regency Electric app by searching for
MUS FLAME on Apple App Store or Google Play Store.
Pairing Your Fireplace Automatically
1. Ensure "Auto Scan" is selected at the top of the screen.
2. If your fireplace is off, turn it on now.
3. The Wi-Fi connection on your electric fireplace will now need to
be put to pairing mode to connect to the app.
4. To do this, press and hold the Wi-Fi button on the unit, for 3
seconds until a beep is heard and the fuel bed flashes to indicate
that the fireplace is in pairing mode. When the fireplace icon is
found on screen, click Next.
5. The app will now load and pair the fireplace with the app.
a. If you are having problems connecting automatically, try pairing
the fireplace in Manual Mode.
6. Once connected, the fuel bed will glow a solid color. Click done to
finish pairing the fireplace.
7. Turn on the fireplace using the power button next to your paired
fireplace name.
8. Click on the fireplace name, and you will now enter the home
screen to control the fireplace.
Pairing Your Fireplace Manually
1. Ensure "Add Manually" is selected at the top of the screen. Then
choose option A. (choose option B or C if you are pairing a second
or 3 fireplace in your home).
2. Enter your home Wi-Fi network and password and click Next.
Repeat steps.
3. The Wi-Fi connection on your electric fireplace will now need to
be put to pairing mode to connect to the app.
4. To do this, press and hold the Wi-Fi button on the unit, for 3
seconds until a beep is heard and the fuel bed flashes to indicate
that the fireplace is in pairing mode. When the fireplace icon is
found on screen, click Next.
5. The app will now load and pair the fireplace with the app.
6. Once connected, the fuel bed will glow a solid color. Click done to
finish pairing the fireplace.
7. Turn on the fireplace using the power button next to your paired
fireplace name.
8. Click on the fireplace name, and you will now enter the home
screen to control the fireplace.
Adding Multiple Users for a Fireplace on the App
1. Connect your fireplace to the app.
2. From the Home Screen, click the edit button in the upper right
corner.
3. Click "Share Device".
4. Click "Add Sharing".
5. Enter the email associated with the new user (email must match
the email they used to sign up to the app).
6. The new user will get a notification that they have been added to
the fireplace.
Set Temperature Units C/F
1. Click on the 3 bars in the top left corner to set your Temperature
Units.
2. Depending on your preference, select either Celsius or Fahrenheit.
10 10
REGENCY ELECTRIC APP INSTRUCTIONS
Owner's Information
HOME SCREEN MANUAL CONTROLS
Power Button – Turns the fireplace on/off
Flame Button – Turns the flame on/off
Heater Button – Turns the heater on/off
Flame & Heating Adjustment – Manual & Automatic
1. To control the heating adjustments manually, use the circle scroll
wheel in the center of the screen. The target temperature is
displayed in the middle. The smaller button above indicates the
current room temperature.
2. Ensure the left orange Flame button is set to Manual.
3. Ensure the right orange Heat button is either set to Low or High
4. To control the heating adjustments automatically, Ensure the left
orange Flame button is set to Automatic. Ensure the right orange
Heat button is set to Automatic.
*Note: To use automatic controls, the APP Power, Flame & Heat
buttons must be turned on.
Timer Button
1. A basic timer can be set from the home screen by tapping the
hourglass timer symbol.
2. Click on the numbers in the top right corner.
3. From here you can set the duration of time in which you want
your fireplace to turn off.
4. Click Save or Cancel.
5. Click the icon again to remove the timer.
DROP DOWN MENU CONTROLS
Flame Adjustment – My Flame (Onyx Only)
1. To access My Flame settings, click on the 3 bars in the top left
corner.
2. Select the My Flame button.
3. There are 6 pre-set flame palettes. Choose 1 of 6, or set your
own using options 7-9.
4. To customize a flame to your liking – Choose 7, 8 or 9.
5. Go back to your menu & select your customization options (Main
Flame, Flame Palette, Speed, Fuel Bed & Downlight).
6. Go back to My Flame and click "Save" then Click on the 7, 8 or 9
that you picked in above step.
Flame Adjustment – Main Flame/Flame (Onyx & Skope)
1. To access Main Flame Adjustment settings, click on the 3 bars in
the top left corner.
2. Select the Main Flame button.
3. Use the scroll wheel to adjust the Flame color. Use the slider
below to adjust the flame brightness. Use the second slide to
adjust the flame speed.
4. You can also turn the Flame on or off using the toggle button.
Flame Adjustment – Flame Palette (Onyx Only)
1. To access Flame Palette Adjustment settings, click on the 3 bars
in the top left corner.
2. Select the Flame Palette button.
3. Use the scroll wheel to adjust the Flame color. Use the slider
below to adjust the flame brightness. Use the toggle button to
match your Flame Palette to your Fuel Bed choice.
4. You can also turn the Flame on or off using the toggle button.
Flame Adjustment – Flame Speed (Onyx Only)
Same as Main Flame adjustments