Regency Fireplace Products Onyx EX110 Instructions For Use & Installation page 15

GENERAL
TOOLS REQUIRED
A Screwdriver, Spirit Level, Saw and Drill will be needed.
UNPACKING THE FIREPLACE
WARNING! DO NOT use this appliance if any part has been
exposed to water.
Immediately call a qualified service technician to inspect and to
replace any part of the electrical system if necessary.
Open the packaging carefully and remove the polystyrene.
Remove and discard the plastic bag.
Keep plastic wrapping away from children.
Be responsible when handling the packing materials.
Check all parts and accessories are removed before disposing of
any packaging.
If necessary keep the original packaging for future transport and/
or storage.
Test the appliance before installation.
WARNING! KEEP ALL COMBUSTIBLE MATERIALS AT LEAST
1M/3.3' FROM THE FRONT OF THE ELECTRIC FIREPLACE.
LOCATION OF SERIAL DECAL
Location of the serial decal
INSTALLATION
EX110
EX150
EX190
SERIAL DECALS
Note: For illustration purposes
only. May not be exactly as shown.
15