Finish The Raid Setup - SOLTEK B9A-FGR Manual

(8) On the next screen, you are prompted to install the "NVIDIA RAID
CLASS DRIVER" and "NVIDIA NForce Storage Controller".
Please note that you should install both items. So, first press <Enter>
on "NVIDIA RAID CLASS DRIVER" to continue.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press
ESC to return to the previous screen.
S=Specify Additional Device
(9) When the following screen appears , press S again to specify an
additional device and press <Enter> to continue.
Windows Setup
Setup will load support for the following mass storage driver(s):
NVIDIA RAID CLASS DRIVER
* To specify additional SCSI adapters, CD-ROM drives, or
special disk controllers for use with Windows, including
those for which you have a device support disk from a
mass storage device manufacturer, press S.
* If you do not have any device support disks from a mass
storage device manufacturer, or do not want to specify
additional mass storage devices for use with Windows,
press ENTER.
S=Specify Additional Device
(10) You will be promted to insert the driver disk into CD_ROM drive
again. After you have inserted the driver disk, press Enter to
continue.
NVIDIA RAID CLASS DRIVER
NVIDIA NForce Storage Controller
Enter=Continue
Enter=Continue
89
Chapter 5 Promise RAID Setup
F3=Exit
F3=Exit