SL-B9A-FGR
2.9.0 How to tackle the Jumpers:
1
2
If a pin-header (of 2 or more pins) is
designed in such a way that its pins
can be closed or linked together to
set up a specific function, this header
is called a jumper in this manual.
• A Jumper is usually but not necessarily given a "JpX" legend.
• In the Jumper setting diagram, the jumper pins covered with
black marks stand for closed pins with jumper cap.
1
Jp X
Jumper with
Pin 2-3 closed
• Do not remove any jumper cap when power is on. Always
make sure the power is off before changing any jumper settings.
Otherwise, the mainboard will be damaged.
3
A 3-pin Jumper
3
1
Jumper with
all pins opened
26
A 2-pin
Jumper
Cap
The conductor inside the cap
links two header-pins together.
3
1
Jumper with
Pin 1-2 closed
3