About The Nvraid Bios - SOLTEK B9A-FGR Manual

5-3. About the NVRAID BIOS

1. Enter the RAID BIOS by pressing F10 when prompted after rebooting
the system.
2. The NVIDIA RAID Utility - Defind A New Array windows appears.
RAID Mode : Striping
Free Disks
Loc Disk Model
1.1.M ST3120026AS
1.0.M ST3120026AS
[F6] Back [F7] Finish [TAB] Navigate [
Definiton of New Array
Typically a system contains a controller and multiple channels, and each
channel has a slave and a master except for SATA drives.
The status of the new array lists the information as below.
1.0.M
M: Master S: Slave
Controller
Channel - Channel 0 stands
for Parallel ATA drives while
Channel 1 stands for Serial
ATA drives.
NVIDIA RAID Utility
- Define a New Array -
Name
[ ] Add
[ ] Del
Parallel ATA
0.0.M Channel 0, Controller 0, Master
0.0.S Channel 0, Controller 0, Slave
0.1.M Channel 0, Controller 1, Master
0.1.S Channel 0, Controller 1, Slave
Serial ATA
1.0.M Channel 1, Controller 0, Master
1.1.M Channel 1, Controller 1, Master
83
Chapter 5 Promise RAID Setup
Jan 7 2004
Striping Block : Optimal
Array Disks
Loc Disk Model
] Select [ENTER] Popup
Name