Configure The Raid Setup - SOLTEK B9A-FGR Manual

SL-B9A-FGR

5-4. Configure the RAID Setup

The RAID Mode Selection
There are four modes to choose - Striping (RAID 0), Mirroring (RAID 1),
Stripe Mirroring (RAID 0+1), Spanning (JBOD). To change to a different
RAID mode, press the arrow key up or down until the mode you want
appears in the screen.
The Striping Block Size Selection
Striping Block Size affects how data is arranged on the disk. It is
recommand to leave this value at default.
Create the New Array
1. Press tab key to Free Disks section.
2. Move the disks appearing in this block (the disks are enabled from
the IDE Function Setup of BIOS) to the Array Disks block by pressing
the right arrow key.
RAID Mode : Striping
RAID Mode : Striping
Free Disks
Free Disks
Loc Disk Model
Loc Disk Model
[F6] Back [F7] Finish [TAB] Navigate [
[F6] Back [F7] Finish [TAB] Navigate [
NVIDIA RAID Utility
NVIDIA RAID Utility
- Define a New Array -
- Define a New Array -
Name
Name
[ ] Add
[ ] Add
[ ] Del
[ ] Del
Jan 7 2004
Jan 7 2004
Striping Block : Optimal
Striping Block : Optimal
Array Disks
Array Disks
Loc Disk Model
Loc Disk Model
1.1.M ST3120026AS
1.1.M ST3120026AS
1.0.M ST3120026AS
1.0.M ST3120026AS
] Select [ENTER] Popup
] Select [ENTER] Popup
84
Name
Name