4-6.5.1 Ide Function Setup - SOLTEK B9A-FGR Manual

SL-B9A-FGR

4-6.5.1 IDE Function Setup

Choose "IDE Function Setup" in "Integrated Peripherals" and press
<Enter>. The following sub-screen will appear for RAID device
configuration:
IDE RAID
x IDE Channel0 Master RAID
x IDE Channel0 Slave RAID
x IDE Channel1 Master RAID
x IDE Channel1 Slave RAID
x SATA Primary Master RAID
x SATA Secondary Master RAID
IDE RAID This item allows you to enable/disable onboard
IDE Channel 0/1
Master/Slave RAID
Primary/Secondary
Master/Slave RAID
On-Chip IDE Channel
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
Phoenix - AwardBIOS CMOS Setup Utility
IDE Function Setup
RAID function.
If IDE RAID is enabled, users can choose which
IDE device to enable RAID function. nForce3 250
Gb supports RAID 0, 1, and 0+1 funciton.
SATA If IDE RAID is enabled, users can choose which
SATA device to enable RAID function. nForce3
250 Gb supports RAID 0, 1, and 0+1 funciton.
The chipset contains a PCI IDE interface with
0/1 support from two IDE channels. Select Enabled
to activate the first and/or the second IDE
interface. Select Disabled to inactivate an inter-
face if you install a primary and/or second add-
on IDE interface.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose
Auto. You need to set to a lower mode than Auto
when your hard disk becomes unstable.
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
64
Item Help