TRENDnet User's Guide
Mode
4.1.183
snmp targetparams
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
Global Configuration Mode
This command configures the SNMP target parameters.
The no form of the command removes the SNMP target parameters.
snmp targetparams <ParamName> user <UserName> security-model
{v1 | v2c | v3 {auth | noauth | priv}} message-processing {v1 | v2c | v3}
no snmp targetparams <ParamName>
•
<ParamName>
- Sets a unique identifier of the parameter.
TL2-F7120