Table of Contents
Advertisement
TRENDnet User's Guide
6
. IGMP
4.1.93
shutdown snooping
Command Objective
✏
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command shuts down snooping in the switch. When the user does not
require the IGMP snooping module to be running, it can be shut down. When
shut down, all resources acquired by the Snooping Module are released to the
system. For the IGS feature to be functional on the switch, the 'system-
control' status must be set as 'start' and the 'state' must be 'enabled'.
The no form of the command starts and enables snooping in the
switch.
Snooping cannot be started in the switch, if the base bridge mode is
configured as transparent bridging.
shutdown snooping
no shutdown snooping
Global Configuration Mode
TL2-F7120
Advertisement
Table of Contents
