Table of Contents
Advertisement
TRENDnet User's Guide
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
•
add
- Appends the new configured ports to the existing member port
list of the vlan.
•
<interface-type>
- Configures the ports that should be set as a
member of the VLAN.
•
port-channel
-
Sets the list of port channel interfaces or a specific
port channel identifier. Use comma as a separator without space
while configuring list of interfaces. Example: 1,3.
•
pw
- Configures the Pseudo wire interface as member port. When the
pseudo wire interface is mapped to a specific VLAN, the interface
structures are created. This value ranges between 1 and 65535.
-
Maximum number of8 interfaces supported in the system is 100.
•
ac <a,b,
c-d>- Configures the specified attachment circuit interface
as a member port. This value ranges between 1 and 65535. Use
comma as a separator without space while configuring list of
interfaces. Example: 1,3.
TL2-F7120
Advertisement
Table of Contents
