Table of Contents
Advertisement
TRENDnet User's Guide
4.1.182
snmp targetaddr
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the SNMP target address.
The no form of the command removes the configured SNMP target
address.
snmp targetaddr <TargetAddressName> param <ParamName>
{<IPAddress> | <IP6Address>} [timeout <Seconds(1-1500)] [retries
<RetryCount(1-3)] [taglist <TagIdentifier | none>]
65535)>]
no snmp targetaddr <TargetAddressName>
[port <integer (1-
TL2-F7120
Advertisement
Table of Contents
