Table of Contents
Advertisement
TRENDnet User's Guide
4.1.231
show mac-address-table static multicast
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command displays the static multicast MAC address entries
created in the FDB table.
These entries contain VLAN ID to which multicast MAC address entry is
assigned, multicast MAC address, member ports, receiver ports, forbidden
ports, the status of entry (that is permanent, static and so on), and total
number of entries displayed.
show mac-address-table static unicast [vlan <string(9)>] [address
<ucast_mac>] [{interface
<interface-type>
<string(32)>}]
•
vlan
<vlan-range>- Displays all static / dynamic unicast and multicast
MAC entries created in the MAC address table for the specified VLANs
alone. This value denotes the VLAN ID range for
which the entries need to be displayed. This value is a string with
<ifnum> | switch
TL2-F7120
Advertisement
Table of Contents
