Table of Contents
Advertisement
TRENDnet User's Guide
Configure web timeout settings
System > Timeout
The web timeout allows you to configure the maximum idle time allowed in the switch
management configuration page before automatically logging out.
1. Log into your switch management page (see
on page 9).
2. Click on System and click Timeout.
3. Enter the amount of idle timeout in minutes before automatically logging out. You
can also enter 0 to set no limit on idle time out.
Click Apply to save the web idle timeout settings.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
View statistics data
System > Statistics
This section will allow you to view packet statistics for L2 Spanning Tree & GVRP/L3
DHCP Snooping/802.1X/Port/RMON.
1. Log into your switch management page (see
on page 9).
2. Click on System and click Statistics.
3. Click on the sections to view packet statistics information based on the type of
information to view. You can click Refresh to force refresh of the displayed content or
clear to delete all statistics.
TL2-F7120
"Access your switch management
page"
22
Advertisement
Table of Contents
