TRENDnet TL2-F7120 User Manual page 166

TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command specifies the IPv6 TCP packets to be forwarded based on the
associated parameters.
•
deny udp {any | host <ip6_addr> <short(0-128)>} [eq <short (1-
65535)>] {any | host <ip6_addr> <short(0-128)>} [ eq <short (1-
65535)> ] ace-priority <integer (1-2147483647)> [dscp <short (0-
63)>]
•
udp - User Datagram Protocol.
•
any | host <ip6_addr> <integer(0-128)>
/ any host
•
eq <short (1-65535)> - Port Number.
•
any | host <ip6_addr> <integer(0-128)>
host / any host.
•
ace-priority <integer (1-2147483647)>
used to decide which filter rule is applicable when the packet
matches with more than one filter rules.
•
dscp <short (0-63)> - Differentiated services code point provides
the quality of service control.
IPV6 ACL Extended Access List Configuration Mode
- Source address of the host
- Destination address of the
- The priority of the filter is
TL2-F7120