TRENDnet TL2-F7120 User Manual page 252

12-port 10g layer 2 managed sfp+ switch
Table of Contents

Advertisement

TRENDnet User's Guide
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
ipv6 mld snooping mrouter <interface-type> <0/a-b, 0/c, ...>
no ipv6 mld snooping mrouter <interface-type> <0/a-b, 0/c, ...>
<interface-type>
- Clears all port-level spanning-tree statistics
information for the specified type of interface. The interface can be:
gigabitethernet
– A version of LAN standard architecture
that supports data transfer upto 1 Gigabit per second.
port-channel
– Logical interface that represents an
aggregator which contains several ports aggregated
together.
<0/a-b, 0/c, ...>
- Sets the list of multicast router ports for the list
of interfaces or a specific interface identifier. This value is a combination
of slot number and port number separated by a slash. Port-channel ID is
provided, for interface type port-channel. Use comma as a separator
without space while configuring list of
interfaces. Example: 0/1, 0/3 or 1, 3.
Config-VLAN Mode
TL2-F7120

Advertisement

Table of Contents
loading

Table of Contents