Table of Contents
Advertisement
TRENDnet User's Guide
4.1.92
ipv6 mld snooping group-query-interval
Command Objective
✏
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the time period for which the switch waits after sending
a group specific query to determine if the hosts are still interested in a
specific multicast group. The value ranges between 60 and 600. In proxy
reporting mode, general queries are sent on all downstream interfaces with
this interval, only if the switch is the Querier.
The no form of this command sets the MLDS queriy interval to default value.
The configuration can be done only for the VLANs that are activated in
the switch.
TL2-F7120
Advertisement
Table of Contents
