TRENDnet TL2-F7120 User Manual page 341

TRENDnet User's Guide
4.1.187 set sntp client
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the listening port for SNTP client which refers to a port
on a server that is waiting for a client connection. The value ranges between
1025 and 65535.
The no form of this command deletes the listening port for SNTP client and
sets the default value.
set sntp client {enabled | disabled}
•
enabled - Enables SNTP client module and sends a request to the host
for time synchronization.
•
disabled - Disables SNTP client module and no request is sent to
the host for time synchronization.
SNTP Configuration Mode
TL2-F7120