Table of Contents
Advertisement
TRENDnet User's Guide
Command Objective
✏
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the forward timer of the spanning tree and the no
form of the command sets the forward timer to the default value. The
forward timer controls the speed at which a port changes its spanning tree
state from Blocking state to Forwarding state. The timer value ranges
between 4 and 30 seconds.
The values configured for the spanning tree forward timers should
satisfy the following conditions:
2* (forward-time - 1) >= max-age, and max-age >= 2 * (hello- time +1)
This command is a standardized implementation of the existing command;
spanning-tree timers. It operates similar to the existing command.
The STP forward timers can be configured in the switch, only if the spanning
tree functionality is not shutdown in the switch. The type of spanning tree
Mode should be set, if the functionality is already shutdown.
TL2-F7120
Advertisement
Table of Contents
