TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command selects the range of physical interfaces and VLAN
interfaces to be configured.
The no form of the command selects the range of VLAN interfaces to be
removed.
interface range ( { <interface-type> <slot/port-port>} {vlan <vlan- id(1-
4094)> - <vlan-id(2-4094)>})
no interface range vlan <vlan-id(1-4094)> - <vlan-id(2-4094)>
•
<interface-type>
- Selects the range of the specified interface.
•
<slot/port-port>
- Selects the range of the specified interface
identifier. This is a unique value that represents the specific
interface. This value is a combination of slot number and port
number separated by a slash.
•
vlan <vlan-id(1-4094)>
- <vlan-id(2-4094)> - Selects the range of
the specified VLAN ID. This is a unique value that represents the
specific VLAN created and activated. This value ranges between 1 and
4094.
TL2-F7120