TRENDnet TL2-F7120 User Manual page 280

TRENDnet User's Guide
15
. QOS
4.1.148 Storm-control
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the storm control rate for broadcast, unknown-
multicast and DLF packets.
The no form of the command sets storm control rate for broadcast,
unknown-multicast and DLF packets to the default value.
storm-control { broadcast | unknown-multicast | dlf } level <rate-
value>
no storm-control { broadcast | unknown-multicast | dlf } level
•
broadcast - Broadcast packets.
•
unknown-multicast –Unknown multicast packets.
•
dlf - Unknown unicast packets.
•
level - Storm-control suppression level as a total number of
packets per second.
Interface Configuration Mode
TL2-F7120