TRENDnet TL2-F7120 User Manual page 151

12-port 10g layer 2 managed sfp+ switch
Table of Contents

Advertisement

TRENDnet User's Guide
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
udp
- User Datagram Protocol.
any| host <src-ip-address>|<src-ip-address> <mask>
address can be
'any' or
the dotted decimal address or
the IP Address of the network or the host that the packet is from
and the network mask to use with the source address.
eq <short (1-65535)>
- Port Number.
any|host <dest-ip-address>|<dest-ip-address> <mask>
Destination IP address can be
'any' or
the dotted decimal address or
the IP Address of the network or the host that the packet is
destined for and the network mask to use with the destination
address
ace-priority <integer (1-2147483647)>
used to decide which filter rule is applicable when the packet
matches with more than one filter rules.
dscp <short (0-63)>
- Differentiated services code point provides the
quality of service control.
IPV4 ACL Extended Access List Configuration Mode
- Source IP
-
- The priority of the filter is
TL2-F7120

Advertisement

Table of Contents
loading

Table of Contents