Table of Contents
Advertisement
TRENDnet User's Guide
20
STP
4.1.192
spanning-tree
Command Objective
✏
Copyright 2023 TRENDnet. All Rights Reserved.
This command enables the spanning tree operation in the switch for the
selected spanning tree Mode.
Spanning tree operation provides path redundancy while preventing
undesirable loops in the network that are created by multiple active paths
between stations. It logically breaks such loops and prevents looping traffic
from clogging the network.
The no form of this command disables the spanning tree operation in the
switch. The spanning tree operation is automatically enabled in the switch,
once the spanning tree Mode is changed.
The spanning tree operation can be enabled in the switch only if the spanning
tree functionality is not shutdown in the switch. The type of spanning tree
Mode should be set, if the functionality is already shutdown.
TL2-F7120
Advertisement
Table of Contents
