TRENDnet TL2-F7120 User Manual page 419

TRENDnet User's Guide
4.1.224 switchport ingress-filter
Command Objective This command enables ingress filtering feature on the port.
The ingress filtering is applied for the incoming frames received on the
port. Only the incoming frames of the VLANs that have this port in its
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
member list are accepted. This configuration does not affect VLAN
independent BPDU frames such as GVRP BPDU and STP BPDU. It affects only
the VLAN dependent BPDU frames GMRP BPDU.
The no form of the command disables ingress filtering feature on the port.
All incoming frames received on the port are accepted.
switchport ingress-filter
no switchport ingress-filter
Interface Configuration mode (Physical / Port channel)
TL2-F7120