Table of Contents
Advertisement
Description
3.1
Overview of the connectivity module
Using integrated sensors, the connectivity module captures important operating and status
data of a motor. The captured data is preprocessed, transferred via a LAN interface, and made
available in SIDRIVE IQ for analysis.
The connectivity module is designed for high-voltage motors connected directly to the line
supply (DOL only – not converter operation).
The connectivity module comprises the following components:
• Sensor box attached to the motor:
– CPU SIMATIC S7-1212C DC/DC/DC
– SIPLUS CMS1200 SM1281
– SIPLUS S7-1200 SM 1231 RTD
• SIDRIVE IQ Drive System Connect Nano
– SIMATIC IPC127E industrial PC
– Software image
– License for Siemens CMS X-Tools
Note
The connectivity module and SIDRIVE IQ are used to monitor the state/condition of a motor. The
connectivity module cannot be used to influence a motor. The connectivity module is not a
remote maintenance system.
Operating Instructions, 06/2020
3
13
Advertisement
Table of Contents
