Insert Spaces; Delete Character; Move Cursor; Enter Text From Text List - JUMO LOGOSCREEN nt Operating Instructions Manual

Select
temperature
unit
9.1.2

Insert spaces

9.1.3

Delete character

9.1.4

Move cursor

9.1.5

Enter text from text list

9.1.6

Finish entry

h Select " " and press the control knob.
All the temperature units that can be selected will now be shown. For better
legibility, the degree sign (°) and the unit of measure (C or F) are separated,
and must be individually selected.
The selection and confirmation of the symbol is made by rotating and pressing
the control knob.
h Select the space button (
The space character will be inserted to the right of the cursor.
h Select the delete button (
The character to the left of the cursor will be deleted.
h Select the cursor positioning button (
knob.
The cursor can now be moved. To end shifting, press the control knob again.
The last 20 texts that were entered (confirmed by OK) will be stored in the
recorder, in an internal text list. This function can be used to call up the list and
select a text for current application.
h Call text list (
The selection and confirmation of the required text are made by rotating and
pressing the control knob.
h Select the "OK" button (
Character entry will now be ended. The text that was entered is accepted, and
the dialog window is closed.
9 Entering text and values
) and press the control knob.
) and press the control knob.
).
) and press the control knob.
) and press the control
73