Onboard Measuring System Interface (C230-2, C240) - Siemens SIMOTION C 230-2 Operating Instructions Manual

4.6

Onboard measuring system interface (C230-2, C240)

Connectors to the encoder
A 15-pin Sub-D socket for the connection of incremental or absolute encoders (SSI) is provided
for each axis.
With the C240, this interface (X3 to X6) can also be used as a counter input.
Position of connectors
This figure shows the mounting position and the designation of the connector on the module.
Figure 4-8
Connector pin assignment
Designation:
X3, X4, X5, X6 - ENCODER 1 to 4
Assignment of ENCODER - axis channel:
X3 - axis channel 1
X4 - axis channel 2
X5 - axis channel 3
X6 - axis channel 4
Type: 15-pin Sub-D socket connector
Table 4-9
Pin
1
2
3
4
SIMOTION C
Operating Instructions, 11/2022, A5E33441428B
Position of connectors X3 to X6
Assignment of connectors X3 to X6
Encoder
Incremental Absolute
Not assigned
CLS
CLS_N
P5EXT
4.6 Onboard measuring system interface (C230-2, C240)
Type Pin
Incremental
9 MEXT
O 10 Z
O 11 Z_N
VO 12 B_N
Interfaces
Encoder Type
Absolute
VO
I
I
I
57