Electronic Parking Brake - Renault Captur User Manual

ELECTRONIC PARKING BRAKE

1
2
Assisted operation
Applying the electronic parking
brake
With the vehicle stationary, the elec-
tronic parking brake can be used to im-
mobilise the vehicle:
– by pressing the engine start/stop
button 1 or by turning the ignition
key to the 2 "ON" position (2);
or
– when the driver's seat belt is un-
fastened;
or
– when the driver's door is opened;
(1/4)
3
4
or
– for vehicles fitted with an automatic
gearbox, when position P is en-
gaged.
The electronic parking brake can be used to immobilise the vehicle.
Before leaving the vehicle, check that the electronic parking brake is fully
applied.
Warning light 3 on switch 4 and warning light
panel illuminate to show that the parking brake is applied but switch off when the
doors are locked. Depending on the vehicle, a sticker is located on the upper sec-
tion of the windscreen to remind you of this.
In all other instances, for example the
engine has stalled or is in standby
due to the Stop and Start ➥ 2.12,
the assisted parking brake is not ap-
plied automatically. Manual mode must
be used. For certain country-specific
model versions, the assisted brake ap-
plication function is not activated. Refer
to the information on "Manual opera-
tion".
To confirm that the electronic parking
brake is applied, the message "Parking
Brake ON" is displayed, the
warning light appears on the instrument
panel and the 3 warning light appears
on the 4 switch.
After the engine is switched off, indi-
cator light 3 goes out several minutes
after the assisted parking brake has
been applied and indicator light
goes out when the vehicle is locked.
}
on the instrument
}
}
2.25