Table of Contents
Advertisement
data is copied into the drive/motor RAM memory which is used during runtime. It is also possible
to save the setup data on your PC and use it in other applications. Note that you can upload the
complete setup data from a drive/motor.
To summarize, you can define or change the setup data of an application in the following ways:
create a new setup data by going through the motor and drive dialogues
use setup data previously saved in the PC
upload setup data from a drive/motor EEPROM memory
5.2.3.4
Program motion
In the project window left side, select "M Motion", for motion programming. This automatically
activates the Motion Wizard.
The Motion Wizard offers you the possibility to program all the motion sequences using high level
graphical dialogues which automatically generate the corresponding TML instructions. Therefore
with Motion Wizard you can develop motion programs using almost all the TML instructions
without needing to learn them. A TML program includes a main section, followed by the
© Technosoft 2011
72
IDMx40 Technical Reference
Advertisement
Table of Contents
