Led Indicators; First Power-Up - Technosoft IDM240-5EI Technical Reference

3.4. LED Indicators

LED Color
Green
Red

3.5. First Power-Up

In order to setup the drive for your application you need to communicate with it. The easiest way
is via an RS-232 serial link between your PC and the drive. Therefore, before the first power-up,
check the following:
Power supply connections and their voltage levels
Motor connections
Serial cable connections
DIP switch positions: all shall be OFF (not pressed)
EasySetUp is installed on the PC which is serially connected with the drive (see
chapter Step 2. Drive Setup
© Technosoft 2011
Function
Lit after power-on when the drive initialization ends. Turned off
when an error occurs
Turned on when the drive detects an error condition or when
OUT#12 is set to 24V with ROUT#12 TML instruction
56 IDMx40 Technical Reference