Mitsubishi Electric MR-J4 B Series Instruction Manual page 364

General-purpose ac servo
Table of Contents

Advertisement

APPENDIX
App. 3 Symbol for the new EU Battery Directive
Symbol for the new EU Battery Directive (2006/66/EC) that is plastered to general-purpose AC servo battery
is explained here.
This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and
components which can be recycled and/or reused.
This symbol means that batteries and accumulators, at their end-of-life, should be disposed of separately
from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the
battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows.
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used batteries and accumulators. Please,
dispose of batteries and accumulators correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
App. 4 Compliance with the CE marking
This servo amplifier is designed to comply with EN61800-3 and EN61800-5-1 standard.
App. 4.1 What is CE marking?
The CE marking is mandatory and must be affixed to specific products placed on the European Union. When
a product conforms to the requirements, the CE marking must be affixed to the product. The CE marking
also applies to machines and equipment incorporating servos.
(1) EMC directive
The EMC directive applies to the servo units alone. This servo is designed to comply with the EMC
directive. The EMC directive also applies to machines and equipment incorporating servos. This requires
the EMC filters to be used with machines and equipment incorporating servos to comply with the EMC
directive.
(2) Low voltage directive
The low voltage directive also applies to servo units alone. This servo is designed to comply with the low
voltage directive.
Note. This symbol mark is for EU countries only.
App. - 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melserivo-j4

Table of Contents