Miele H 2766 BP Manual page 69

Problem
12:00 appears in the dis-
play.
appears in the
Power cut
display.
Max. op. hours reached
pears in the display.

F32 appears in
Fault
the display.

Fault F33 appears in
the display.
and a fault code
Fault
not listed here appears
in the display.
A noise can be heard
after a cooking pro-
gramme.
The oven has switched
itself off.
Cause and remedy
The power supply was interrupted for longer than
5 minutes.
 Reset the time of day (see "Settings – Time of
day").
Cooking process times will also need to be reset.
There has been a brief power cut. This has caused
the current cooking process to stop.
 Turn the operating mode selector to 0.
 Restart the cooking process.
ap- The oven has been operating for an unusually long
time. This has triggered the safety switch-off func-
tion.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact the Miele
Customer Service Department.
The door lock for pyrolytic cleaning has not opened.
 Switch the oven off and then back on again.
 If the door lock still does not deactivate itself, con-
tact the Miele Customer Service Department.
A fault has occurred that you cannot resolve.
 Call the Miele Customer Service Department.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
To save power, the oven switches off automatically if
a button is not pressed after a certain amount of time
or after a cooking programme has ended.
 Switch the oven back on.
Problem solving guide
69