Basic Settings - Miele H 2766 BP Manual

Basic settings

The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").

Risk of injury caused by hot sur-
faces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply. 12:00 will appear in the dis-
play.
 Turn the operating mode selector to
Booster .
The first basic setting appears in the
display.
Setting the language
 Select the desired language.
If you have selected the wrong lan-
guage by mistake, proceed as de-
scribed in "Settings –  Language".
Setting the location
 Select the required location.
Before using for the first time
Setting up Miele@home
Set up "Miele@home"
display.
 To set up Miele@home now, confirm
by touching OK.
 To set it up at a later date, select
and confirm with OK.
See "Settings – Miele@home" for in-
formation on setting up at a later
date.
 To set up Miele@home now, select
the desired connection method.
You will then be guided by the display
and the Miele app.
Setting the time
 Set the time of day in hours and
minutes.
 Confirm with OK.
Completing the initial commissioning
process
 Follow any further instructions in the
display.
 Turn the operating mode selector
to 0.
Initial commissioning is now complete.
will appear in the
Skip
29