Table of Contents
Advertisement
Basic settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply. The display will show "Miele"
followed by a prompt to set the
language after a few seconds.
Setting the language
Use the rotary selector to select
the required language.
Confirm with OK.
If you have selected the wrong
language by mistake, proceed as
described in "Settings –
Setting the location
Use the rotary selector to select
the desired location.
Confirm with OK.
Before using for the first time
Language
".
Setting up Miele@home
Set up "Miele@home"
display.
To set up Miele@home now, confirm
by touching OK.
To set it up at a later date, select
with the rotary selector and
confirm with OK.
See "Settings – Miele@home" for
information on setting up at a later
date.
To set up Miele@home now, select
the desired connection method.
You will then be guided by the display
and the Miele app.
Setting the time of day
Set the time of day in hours and
minutes using the rotary
selector .
Confirm with OK.
Completing the initial commissioning
process
Set up finished
will appear.
Confirm with OK.
will appear.
Language
Select the sensor control.
The time of day appears.
Initial commissioning is now complete.
will appear in the
Skip
29
Advertisement
Table of Contents
