Omron sysmac FH Series Hardware Setup Manual page 108

3 Configuration
Connection Configuration
Connection configuration of FH-1000 or FH-3000 Sensor Controller and Camera are the bellows.
Connection configuration using the maximum length of Camera Cables
Con-
15 m
figura-
tion 1
(1)
*1
Con-
CH1
figura-
15 m
tion 2
(1)
*1
15 m
(4)
CH2
Con-
figura-
5 m
tion 3
(1)
*1
Con-
CH1
figura-
5 m
tion 4
(1)
*1
5 m
(4)
CH2
*1. Select the Camera Cables between the Controller and Extension Unit, between the Extension Units, and between the
Extension Unit and Camera according to the connected Camera.
Different types or lengths of Camera Cables can be used for (1), (2), and (3) as well as for (4), (5), and (6). However, the
type and length of Camera Cable (1) must be the same as those of Camera Cable (4), (2) must be the same as (5), and
(3) must be the same as (6).
3 - 50
15 m 15 m
(2)
15 m 15 m
(2)
15 m 15 m
(5)
5 m 5 m
(2) (3)
5 m 5 m
(2) (3)
5 m 5 m
(5) (6)
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
(3)
(3)
Camera cable
connector
(6)
CH1
Camera cable
connector
CH1
Remarks
Camera cable
connector CH2
Camera cable
connector CH2