Precautions For Correct Use - Omron sysmac FH Series Hardware Setup Manual

Precautions for Correct Use

Installation and Storage Sites for FH-1000, FH-3000, FZ5-1200,
FZ5-1100, FZ5-800, FZ5-600, FZ5-L Series
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to +50°C
• No rapid changes in temperature (place where dew does not form)
• Relative humidity of between 35 to 85%RH
• No presence of corrosive or flammable gases
• Place free of dust, salts and iron particles
• Place free of vibration and shock
• Place out of direct sunlight
• Place where it will not come into contact with water, oils or chemicals
• Place not affected by strong electro-magnetic waves
• Place not near to high-voltage, or high-power equipment
Installation and Storage Sites: FH-L series
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of the following environment:
• Installation: 0 to 55°C in
• Storage: -25 to 70°C
• No rapid changes in temperature and place where dew does not form
• Relative humidity of between 10 to 90% RH
• No presence of corrosive or flammable gases
• Place free of dust, salts and iron particles
• Place free of vibration and shock
• Place out of direct sunlight
• Place where it will not come into contact with water, oils or chemicals
• Place not affected by strong electro-magnetic waves
• Place not near to high-voltage, or high-power equipment
Orientation of Product
• For good heat dissipation, install the product only in the position written this manual or Instruction
Sheet so as not to block the ventilation holes.
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Precautions for Correct Use
19