Fh-1000/Fh-3000 Series - Omron sysmac FH Series Hardware Setup Manual

2 Overview of FH/FZ5 series
2-1-2

FH-1000/FH-3000 Series

Vision System FH-1000 and FH-3000 series is the BOX type Sensor Controller having functions,
high-speed, and safety, reliability, and maintainability of a machine embedded controller.
This series includes the previously supported image processing functions and with the addition of new
EtherCAT support, this series now also has the high-speed connectivity needed for connection with
programmable logic controllers and other devices with similar I/O requirements for EtherCAT communi-
cation.
With a maximum of 8 camera connections possible, high-speed image transfer, faster than previously
available, is now possible than herebefore.
OMRON provides Sysmac device which unified communication specification or deigned User Interface
specification. Vision System FH-1000 and FH-3000 series can be easily connected Sysmac device, i.e.
NJ/NX/NY-series Controller or EtherCAT slave. Therefore the optimum functions or operations can be
realized.
The following is an example system configuration.
EtherCAT Connection for FH Series
Example of the FH Sensor Controllers (4-camera type)
Incremental
rotary encoder
Touch Panel Monitor
FH-MT12
*1. To use STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum
foil tape) for EtherCAT and RJ45 connector.
*2. To use STP (shielded twisted-pair) cable of category 5 or higher for Ethernet and RJ45 connector.
2 - 4
Sysmac Studio
Standard Edition
Vision Edition
EtherCAT junction slaves
EtherCAT Cables
Ethernet Cables *2
special cable
cable tor Touch Panel interface
special cable for Touch Panel Monitor
special cable for I/O
Trigger input
sensor
NJ/NX/NY-series
Controller
Vision System
*1
FH Sensor Controllers
special cable for cameras
Another slave
(With built-in EtherCAT slave function)
*1
EtherCAT Cables
PLC for Lighting
I/O control Controllers
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Lighting External
Controllers Lightings
Cameras