Changing The Feed Locus - JUKI LZ-2290C-F Instruction Manual

5-4-3. Changing the feed locus

❷
Name Characteristics
Goes up straight and comes down
straight.
M
This feed locus provides the gener-
al-purpose timing.
The feed timing of this locus is
earlier than the other settings.
S
This feed locus is suitable for light-
weight materials.
The feed timing of this locus is later
than the other settings. This feed
H
locus permits easy formation of
angular shapes of zigzag stitches.
This feed locus is suitable for
stretch materials since it reduces
NU slippage between materials.
Use this feed locus since backward
feed is likely to occur.
❶
❹
❸
Standard
height
1.3 mm
1.3 mm
1.3 mm
1.3 mm
– 102 –
The feed locus can be changed according to the
item to be sewn.
[How to change]
1) Display the sewing data edit screen bypress-
❶ .
ing
2) Display "S068 Feed locus" by pressing
❷ .
3) Change the feed locus.
* Refer to the following for the types of feed-
locus.
4) Confirm your entry by pressing
5) Display the sewing screen by pressing
❹ .
Image of oper-
Stitch length and sewing speed
ation
0 to 4.00 mm : 5,000 sti/min
4.05 to 5.00 mm : 4,000 sti/min
0 to 5.00 mm : 4,000 sti/min
0 to 5.00 mm : 4,000 sti/min
0 to 5.00 mm : 2,500 sti/min
❸ .