JUKI LZ-2290C-F Instruction Manual page 183

③ Selecting a function to be assigned
<Key customization assignment screen (Operator mode)>
<Key customization assignment screen
(Maintenance personnel mode)>
<Key customization assignment screen (Cycle mode)>
<Key customization assignment screen>
❶
❷ ❸
❹ ❺ ❻
❹ ❷ ❶ ❸
❻ ❼ ❽ ❺
❷ ❶ ❸
❹ ❻ ❺
 ❾


When one of the buttons ❷ to ❽ ( ❷ to ❻ for the
operator mode or cycle mode), the "Key customi-
zation selection screen" is displayed.
1) Press
press the target function button  to allocate
the function to ❷ to ❽ ( ❷ to ❻ for the oper-
ator mode or cycle mode).
2) The counter button is respectively displayed
by pressing ❶ .
3) Press
Cancel the operation with
rent screen returns to the previous screen.
– 178 –
❾ to select the function. Then,
 to confirm the setting.
 . The cur-