JUKI LZ-2290C-F Instruction Manual page 87

● Start from crest and start from root of scallop
Start of sewing
Start from
Needle position
root
after thread
trimming
<Sewing data edit screen>
<Scallop stitch stop position selection screen>
Start from
crest
❼
❽ ❾
Normally, scallop starts
the sewing with the
pattern of start from
root. However, start from
crest can be selected by
changing the setting.
4) Setting the sewing end position.
・ Press
screen "Scallop stitch stop position selection
screen" is displayed.
・ Select the scallop stitch end position ❽ .
: Sewing starting position, optional
: Sewing starting position, bottom
: Sewing starting position, apex
・ When
is confirmed and the screen is returned to the
"Sewing data edit screen".
Refer to
37 for the mirror stitching.
– 82 –
❼ on the sewing data edit
❾ is pressed, the entered value
"4-9. Mirror stitching" p.