Table of Contents
Advertisement
4.6. Changing the throat plate and the feed dog
The normal throat plate and feed dog can be changed to the throat plate and feed dog for straight stitch.
In the case of starting sewing from the edge of material, the material can be smoothly fed without being pulled into
the needle hole by changing the throat plate and feed dog to those for straight stitch.
❷
❹
❺
❻
● Patterns that can be sewn with the throat plate for straight stitch
001
004
030
418
❶
❷
❸
❼
Once the throat plate and feed dog for straight stitch are installed, the
419
420
limited types of patterns that can be sewn with them can be selected.
Turn off the machine or leave the
Machine in Lock Mode
● Removing the throat plate
Remove the presser foot and needle.
Push the T-shape screwdriver ❷ into the groove in front of
the throat plate ❶ . When pressing the screw-driver down-
ward, throat plate will come off .
● Removing the feed dog
Push the T-shape screwdriver ❷ into the groove in the
back of the feed dog ❸ . When pressing the screw-driver
downward, feed dog will come off .
● Attaching the feed dog
Follow the angle in the sketch and place the feed dog so
that the pins ❹ of the feed dog meet the groove ❺ in the
back of feed dog.
Press down the front part of feed dog and engage the
feed dog.
● Attaching the throat plate
Place the area ( ❻ ) fi rst and then push center to right
hand part of the throat plate to assemble ( ❼ ).
23
Advertisement
Table of Contents
