Pattern 2 (Fagoting) - JUKI LZ-2290C-F Instruction Manual

5-3-8. Pattern 2 (fagoting)

When performing fagoting sewing, exclusive gauge is necessary.
Refer to "4-10. Fagot stitch" p.
❶
<Sewing shape selection screen>
<Sewing screen>
<Sewing data edit screen>
39.
❷
❸
❹
1) Select pattern 2 stitch ❶ on the sewing shape
selection screen.
2) When
is confirmed and the screen is returned to the
"Sewing screen".
Feed amount becomes "0" when the
hand switch is pressed.
3) Setting of the position of sewing start.
・ Press
The "Sewing data edit screen" is displayed.
* Refer to "5-3-1. 4) Setting the zigzag width,
stitch baseline and stitch length." p. 78
for the zigzag width, stitch baseline position
and stitch length.
・ When
ing position selection screen" is displayed.
– 92 –
❷ is pressed, the entered value
❸ on the sewing screen.
❹ is pressed, the "Sewing start-