❻
❼
❺
❾
❹
3) Remove air vent cap ❻ attached to the machine
bed. (Be sure to attach cap ❻ when transporting
the machine head in the state that the machine
head is removed from the machine table.)
4) Fit hinge ❽ into the opening in the machine bed,
and fit the machine head to table rubber hinge ❺
before placing the machine head on cushions ❾
on the four corners.
❽
5) Attach head support rod to the machine table.
– 4 –
If the sewing machine is operated with-
out removing air vent cap ❻ , oil leakage
from gear box portion ❼ may occur.
Do not hold the handwheel.