How To Use The Operation Panel (Basic Explanation); Selection Of The Language (Operation To Be Done At First) - JUKI LZ-2290C-F Instruction Manual

2-19. How to use the operation panel (Basic explanation)

2-19-1. Selection of the language (operation to be done at first)

Select the language to be displayed on the operation panel when you turn ON the power to your sewing
machine for the first time after the purchase. Note that, if you turn the power OFF without selecting the lan-
guage, the language selection screen will be displayed every time you turn ON the power to the sewing ma-
chine.
① Turning ON the power switch
Be aware that the needle bar may move automatically, according to the settings of the sewing
machine, when the power is turned ON. The needle bar can also be set so that it does not move
automatically. Refer to
<Welcome screen>
② Selecting the language
❶
<Language selection screen>
The language to be displayed on the operation panel can be changed using the memory switch U406.
Refer to "5-7. List of memory switch data" p. 109
"5-7. List of memory switch data" p. 109
❷
for details.
– 15 –
for details.
Firstly, the welcome screen is displayed on the
panel. Then, the language selection screen is
displayed.
* If you turn ON the power to the sewing ma-
chine again immediately after having turned
it OFF, the sewing machine may sometimes
fail to start. It is therefore recommended to
wait for a while after you have turned OFF the
power to the sewing machine before re-turn-
ing it ON.
Select the language you want to use and press
corresponding language button ❶ . Then, press
❷ .
This determines the language to be displayed on
the panel.