JUKI LZ-2290C-F Instruction Manual page 77

(2) How to set (polygonal-shape stitching)
<Sewing screen (polygonal-shape stitching)
(Maintenance personnel mode)>
<Number of stitches input screen>
❶
❷
❸
① Displaying the number of stitches input
screen
Press ❶ on the sewing data list screen.
Then, the "number of stitches input screen" is
displayed.
② Turning ON the teaching function
Press
tion.
③ Starting teaching
The input value is set to 0 (zero). Carry out
sewing until the needle entry position at which
you want to finish sewing by depressing the
pedal. Then, count the number of stitches
sewn using the teaching function.
④ Confirming the teaching content
Carry out sewing until the end (last stitch)
of sewing step is reached. Then, carry out
thread trimming to confirm the content of
teaching.
Return the current screen to the "sewing
screen (polygonal-shape stitching) (Mainte-
nance personnel mode)".
⑤ Proceeding to the next step
When
proceeded to the next one.
Carry out the steps of setting procedure ①
through ⑤ in repetition.
* If there is no step available for registration,
the transition to the next step cannot be car-
ried out.
– 72 –
❷ to turn ON the teaching func-
❸ is pressed, the sewing step is