JUKI LZ-2290C-F Instruction Manual page 100

❺
<Sewing starting position selection screen>
<Sewing data edit screen>
❽
<Sewing end position selection screen>
❻
❼
❾
– 95 –
・ Select the sewing starting position ❺ .
: Sewing starting position, right 1
: Sewing starting position, center 1
: Sewing starting position, left 1
: Sewing starting position, left 2
: Sewing starting position, center 2
: Sewing starting position, right 2
: Sewing starting position, optional
In the case of "Sewing starting posi-
tion, optional", the sewing machine
starts sewing from the next needle
entry after the completion of thread
trimming.
・ When
❻ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing data edit screen".
4) Setting the sewing end position.
・ Press
❼ on the sewing data edit
screen "Sewing end position selection
screen" is displayed.
・ Select the sewing end position ❽ .
: Sewing end position, right 1
: Sewing end position, center 1
: Sewing end position, left 1
: Sewing end position, left 2
: Sewing end position, center 2
: Sewing end position, right 2
: Sewing end position, optional
・ When
❾ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing data edit screen".