Editing The Custom Pattern - JUKI LZ-2290C-F Instruction Manual

8-5-3. Editing the custom pattern

① Selecting the custom pattern edit function
❶
<Custom pattern list screen>
② Editing the custom pattern value
Editing the custom pattern value.
Refer to "8-5-2. Creating a new custom pattern" p. 160
1) Select custom pattern ❶ you want to edit. Then, press
The "Custom pattern edit screen" is displayed.
Steps of procedure to be taken after the aforementioned step are same as those described in
ing a new custom pattern" p.
1. When the power source is turned OFF without pressing
to the former one. When you desire to determine the data, be sure to press
2. When the setting of the feed direction of the custom pattern is set to the reverse direction,
the max. speed is limited in accordance with the feed amount used.
3. In the case the stitch length differs between the normal feed and the reverse feed, correct
the stitch length appropriately with the memory switch K330 (normal direction stitch length
correction) and K331 (reverse direction stitch length correction).
❷
160.
Display the "Custom pattern list screen" referring
to "8-5-2. Creating a new custom pattern" p.
160.
for the explanation of screen.
❷ .
– 163 –
"8-5-2. Creat-
key, the inputted data returns
key.