JUKI LZ-2290C-F Instruction Manual page 41

[Description of operations of the custom switch]
i00 Not provided with the option input function
i01 Needle up / down correction stitch
i02 Thread trimming function
i03 One-stitch correction stitch
i04 Needle lifting function
i05 Safety switch, input
i06 Function for cancelling reverse feed stitching at
the end of sewing once
i07 Cancellation / addition of automatic reverse feed
stitching
i08 Sewing counter, input
i09 Mirror inversion switch, input
i10 One-touch type changeover switch
❷
Function item
In the case the function item i51 or beyond is
selected, the operation to be carried out when
the button is pressed is set.
: Function is enabled while the button is
held pressed.
: Enable/disable of the function is
changed over by pressing the button.
5) Press
i51 Reverse-feed correction stitch
i52 Presser foot lifting function
i53 Function for cancelling reverse feed stitching at
the start of sewing
i54 Function for prohibiting depress on the front part
of pedal
i55 Function for prohibiting output of thread trimming
i56 Low-speed command input
i57 High-speed command input
i58 Reverse feed stitching switch, input
i59 Sewing speed limit for soft start
i60 One-shot sewing speed command
i61 Reverse-feed one-shot sewing speed command
– 36 –
❷ .
Function item