Table of Contents
Advertisement
The feed amount cannot be set to 0 and the T stitch
pattern may be deformed due to materials, height of fed
dog or gauges. (2nd stitch does not correspond with
4th stitch.)
In this case, carry out correction following the steps of
procedure described below so as to align the needle
entry positions of the second and fourth stitches in the
case the feed amount is 0 (zero).
<Sewing screen>
<Second sewing screen>
5-3-6. T stitch, right
<Sewing shape selection screen>
❶
❷
– 87 –
1
3
2
4
on the sewing screen.
5) Press
The "Second sewing screen" is displayed.
is pressed,
6) When
played. Now, enter a correction value.
is pressed, the entered value
7) When
is confirmed and the screen is returned to the
"Sewing screen".
1) Select T stitch, right ❶ on the sewing shape
selection screen.
❷ is pressed, the entered value
2) When
is confirmed and the screen is returned to the
"Sewing screen".
1
–
3
2
4
+
Correspon-
dence
is dis-
Advertisement
Table of Contents
