Table of Contents
Advertisement
Switch/display
❶
Mode key
❷
Information key
❸
Sewing pattern No. button
❹
Simplified screen lock
button
❺
Sewing-start reverse-feed
stitch button
❻
Sewing-end reverse-feed
stitch button
❼
Part number
❽
Process/comment
❾
Clock display
*
Sewing shape button
This switch is used for displaying the menu screen.
The mode is changed over between the operator mode and maintenance personnel
mode by pressing the Mode key and the Information key simultaneously.
This switch is used for displaying the information screen.
The mode is changed over between the operator mode and maintenance personnel
mode by pressing the Information key and the Mode key simultaneously.
Sewing pattern list screen is displayed. The currently-selected sewing pattern number is
displayed on this button.
This is button is used for changing over the operation status of buttons displayed on the
screen between enable and disable.
This button is used for displaying the simplified lock status of the screen on it.
Locked:
Unlocked:
Once the button operation is locked using the simplified screen lock button, operation of
the buttons displayed on the screen, excluding this button will be disabled.
This button is used for changing "with or without" of the reverse feed stitching at the
beginning of sewing for the sewing pattern displayed on the operation panel.
When reverse feed stitching at the beginning of sewing is placed in the OFF state,
mark is displayed at the upper left of the button.
The reverse feed stitching (at start) edit screen is displayed by keeping this key held
pressed for one second.
→ The aforementioned edit screen is displayed in the case of the free stitching,
constant-dimension sewing, polygonal-shape stitching and continuous sewing, On
this screen, this button is used for changing "with or without" of the reverse feed
stitching at the end of sewing.
This button is used for changing over "with/without" reverse feed stitching at the end of
sewing of the sewing pattern displayed.
When reverse feed stitching at the end of sewing is placed in the OFF state,
is displayed at the upper left of the button.
The reverse feed stitching (at end) edit screen is displayed by keeping this key held
pressed for one second.
→ The aforementioned edit screen is displayed in the case of the free stitching,
constant-dimension sewing, polygonal-shape stitching and continuous sewing, On
this screen, this button is used for changing "with or without" of the reverse feed
stitching at the end of sewing.
The part number is displayed in this field.
The number of characters that can be entered as a part number is 24. As many as 19
characters can be displayed on the upper portion of operation panel.
Depending on the setting of memory switch U404, the process or comment is displayed
in this field.
The number of characters that can be entered as a process is 24. As many as 19
characters can be displayed on the upper portion of operation panel.
The number of characters that can be entered as a comment is 50. As many as 37
characters can be displayed on the upper portion of operation panel.
* For the cycle sewing, only the comment can be entered.
The time set on the sewing machine is displayed in this field in 24-hour system.
The selected sewing shape is displayed on the operation panel.
"5-3. Setting of the sewing shape" p.
Refer to
The shape selection screen is displayed by pressing this button.
– 43 –
Description
78.
mark
Advertisement
Table of Contents
