Pattern 1 - JUKI LZ-2290C-F Instruction Manual

5-3-7. Pattern 1

❶
<Sewing shape selection screen>
<Sewing screen>
<Sewing data edit screen>
❺
<Sewing starting position selection screen>
❷
❸
❹
❻
1) Select pattern 1 stitch ❶ on the sewing shape
selection screen.
2) When
is confirmed and the screen is returned to the
"Sewing screen".
3) Setting of the position of sewing start.
・ Press
The "Sewing data edit screen" is displayed.
"5-3-1. 4) Setting the zigzag width,
* Refer to
stitch baseline and stitch length." p. 78
for the zigzag width, stitch baseline position
and stitch length.
・ When
ing position selection screen" is displayed.
・ Select the sewing starting position ❺ .
: Sewing starting position, center 1
: Sewing starting position, center 2
: Sewing starting position, left
: Sewing starting position, center 3
: Sewing starting position, right
: Sewing starting position, optional
In the case of "Sewing starting posi-
tion, optional", the sewing machine
starts sewing from the next needle
entry after the completion of thread
trimming.
・ When
is confirmed and the screen is returned to the
"Sewing data edit screen".
– 90 –
❷ is pressed, the entered value
❸ on the sewing screen.
❹ is pressed, the "Sewing start-
❻ is pressed, the entered value